PVW with Unitized Ends
When you are looking for a food grade PVC wire reinforced vacuum hose, look no further than the PVW with unitized ends
PVW Hose is a Food Grade PVC Wire Reinforced Vacuum Hose Assembly with Unitized Ends.
TUBE: Smoothbore FDA PVC
COVER: Smoothbore FDA PVC
REINFORCEMENT: Steel wire reinforcement
TEMPERATURE: 25˚F to 150˚
|Part Number||Hose ID Inch||Hose OD Inch||Tri-Clamp® Size||FPT Size||MPT Size||Working Pressure*|
|06RFPVW||0.38||0.63||Mini & 1″||CF||CF||150|
|08RFPVW||0.50||0.75||Mini & 1″||CF||CF”||150|
|10RFPVW||0.63||0.88||Mini & 1″||CF||CF||150|
|12RFPVW||0.75||1.00||1″ & Maxi||CF||CF||150|
|16RFPVW||1.00||1.25||1-1/2″ & 2″||CF||CF||100|
* at 68˚F
CF = Consult Factory
Safety factor of 3:1 working pressure for tubing only.
The fitting chart above reflects molded , unitized connections only.
Consult factory for assembly part numbers.
Also available stainless steel crimped connections, I-Line, Q-Line, and Bevel Seat with nut.
Disclaimer: The information provided within by Rubber Fab is deemed to be accurate; however, it should be used only as a general reference to aid in product selection and application.
Note: A material’s properties may be affected greatly by temperature, operating pressure, concentration, and the presence of other chemicals. Ultimately, the consumer/user must determine the compatibility of any material based on tests done under particular process conditions.