STBS Hose

STBS Hose

This black conductive clear silicone outer cover hose is lined with PTFE, which is a non-stick surface

Smoothbore Black Conductive PTFE Lined Hose with Braided Stainless Steel Cover and Clear Silicone Outer Cover

  • TUBE: Black conductive PTFE
  • COVER: Braided stainless steel & clear silicone outer cover
  • TEMPERATURE: -20°F to 350°F
Resources Additional Specs
Part Number Hose ID Inch Hose OD Inch Bend Radius Inch Max. Working Pressure @70°F PSIG Vacuum Rating @ 70°F in. Hg. Weight per FT
04RFSTBS 0.25 0.56 3.00 3000 FULL 0.12
06RFSTBS 0.38 0.70 4.00 2000 FULL 0.13
08RFSTBS 0.50 0.82 4.00 1425 FULL 0.16
12RFSTBS 0.75 1.08 7.00 1000 FULL 0.20
16RFSTBS 1.00 1.32 12.00 1000 FULL 0.50
24RFSTBS 1.50 1.82 20.00 900 FULL 0.92

Disclaimer: The information provided within by Rubber Fab is deemed to be accurate; however, it should be used only as a general reference to aid in product selection and application.

Note: A material’s properties may be affected greatly by temperature, operating pressure, concentration, and the presence of other chemicals. Ultimately, the consumer/user must determine the compatibility of any material based on tests done under particular process conditions.

Additional Specs

  • Conductive liner dissipates static electricity
  • Silicone cover acts as thermal insulator
  • Lining is smooth PTFE inner core, non-stick surface
  • Non-stick contact surface will not contaminate contacted substances
  • Not affected by weather and will not age in service within the recommended temperature and pressure ratings
  • Withstands high velocity and pressure surges
  • Ease of cleanability
  • Autoclavable
  • Can be steam cleaned
  • Food processing
  • Pharmaceutical processing
  • Cosmetics
  • Hot CIP solutions
  • Chemical products
  • Low pressure steam
  • Broad variety of fittings in 316L Stainless Steel
  • PTFE encapsulated
  • Kynar®/PVDF and other nonmetallic materials
  • Electropolished Stainless Steel Fittings Available
  • Crimped fittings available in other high quality alloys
Kynar® is a registered trademark of Elf Atochem.
  • FDA 21 CFR 177.1550
  • USDA